Enjoy your
It's simple to program your XFINITY Remote to control your
TV and Audio Video Receiver.
XFINITY® TV
right away!
Your XFINITY Remote is already programmed to
control your set-top box. To program the remote
Program your remote to
for control of Power, Volume, Mute and TV
Input on your TV or Power, Volume, and Mute
get started.
on your audio video receiver (AVR), including a
soundbar, follow the steps below.
Note: A soundbar is a type of AVR.
Here's how to program your
remote for control of a TV or TV
and AVR:
1. Remove the battery pull tab from the remote
control battery compartment and make sure
your TV, AVR and set-top box are powered
on.
2. Refer to the "Setup Codes for TVs" and "Set-
up Codes for AVRs" sections on the back of
this guide to find the manufacturers of your
TV and AVR.
3. Press and hold the Setup button on your
remote until the status LED changes from red
to green.
4. Enter the first code listed for the TV manufac-
turer. The status LED should flash green
twice when the code is entered.
5. Press the TV Power button on the remote.
If the TV turns off, you have successfully
programmed your remote. Turn the TV back
on and press the VOL +/- and Mute buttons
to confirm they control the volume of your
XFINITY XR 11
device.
Remote Control
6. If the TV (or AVR) does not turn off or the
USER'S GUIDE
VOL +/- and Mute buttons do not work,
repeat the steps above using the next code
listed for your TV manufacturer.
¡Disfruta de
XFINITY® TV
ahora mismo!
Programa tu control
remoto para comenzar.
XFINITY XR11
GUÍA DEL USUARIO
para el control remoto
If you only want to program your remote for TV
4. Enter the first code listed for the AVR manu-
control, you're all set!
facturer. The status LED should flash green
twice when the code is entered.
Continue with the following steps to program
your remote for AVR control.
5. Press the TV Power button on the remote.
If the AVR turns off, you have successfully
Note: To program your remote for simultaneous
programmed your remote. Turn the AVR back
control of both a TV and AVR, the TV must be
on and press the VOL +/- and Mute buttons
programmed before the AVR.
to confirm they control the volume of your
7. Press and hold the Setup button on your
device. If so, you're all set!
remote until the status LED changes from red
6. If the AVR does not turn off or the VOL +/-
to green.
and Mute buttons do not work, repeat the
8. Enter the first code listed for the AVR manu-
steps above using next code listed for the
facturer. The status LED should flash green
device manufacturer. You may need to try
twice when the code is entered.
several codes to find the one that works for
9. Press the All Power button on the remote.
your device.
If the AVR turns off, you have successfully
CAN'T FIND YOUR CODE?
programmed your remote. Turn the AVR back
on and press the VOL +/- and Mute buttons
If you can't program your remote for TV and/
to confirm they control the volume of your
or AVR control using the codes on the back of
device. If so, you're all set!
this guide, follow the steps below to search for
10. If the AVR does not turn off or the VOL +/-
your code.
and Mute buttons do not work, repeat the
1. Turn on your TV and AVR.
steps above using the next code listed for
2. Press and hold the Setup button on your
your AVR manufacturer.
remote until the status LED changes from red
to green.
Here's how to program your
3. To search for a TV code, enter 9-9-1 on the
remote for only AVR control:
remote. To search for an AVR code, enter
9-9-2. The status LED should flash green
1. Remove the battery pull tab from the remote
twice.
control battery compartment and make sure
4. Press the CH ^ button repeatedly to search
your AVR and set-top box are powered on.
through the manufacturer codes until the
2. Find the manufacturer of your AVR on the
device you are programming turns off.
back of this guide.
5. After the device turns off, press Setup. The
3. Press and hold the Setup button on your
status LED on your remote should flash
green twice. Press the TV Power button on
remote until the status LED changes from red
the remote. If the device turns on, your have
to green
successfully programmed your remote.
xfinity.com/remotes
Troubleshooting
Here's what your remote can do.
Esto es lo que tu control remoto puede hacer.
GENERAL
TROUBLESHOOTING
: Q Why does the status LED flash red then
green while I am entering the code on my
TV Power: Turns your TV on/off.
remote?
All Power: One button to turn the TV,
A: A You may have entered an incorrect code.
AVR and set-top box on/off.
Check the code and try re-entering it.
: Q Why does the status LED flash red, but
Vol +/–: Turns the volume up and down
there is no response when I press a key?
on the set-top box. After your remote is
programmed for TV and/or AVR control,
A: A Make sure the remote is aimed at your TV
these keys control the TV or AVR's
or AVR and is no farther than 15 feet away.
volume.
Also, make sure your set-top box is powered
on and in plain sight.
CH ^/∨A: Selects the next higher or next
lower channel.
Helpful Tip: Additional remote control program-
Mute: Turns the sound on and off.
ming support, including code lookup tool and
frequently asked questions, can be found at
Replay: Jumps back 15 seconds.
xfinity.com/remotes.
Note: Some features above require
programming the remote for control of a
Additional Feature: Aim Anywhere Control
TV and/or AVR.
See the back of this user guide to learn how
to pair your remote and set-top box* for Aim
Anywhere control, allowing you to control your
devices even when they are placed behind your
Video Controls: Controls On Demand
TV or in another room (up to 50 feet away).
or DVR viewing, Play/Pause, Fast-For-
*Aim Anywhere control is not supported by all
ward, and Rewind.
set-top boxes.
Exit: Exits guide screens and returns you
to TV viewing.
Search: Search for content by channel,
program or key words.
Rec: Records content currently being
xfinity.com/remotes
viewed.
XFINITY/Menu: Enters the XFINITY
menu for access to the guide, Saved
programs, On Demand and Apps.
Guide: Shortcut to TV listings.
OK: Selects the highlighted item within
the guide.
Last: When viewing content, enters the
Recent menu to select from the 9 most
recently viewed programs or, when in
the XFINITY menu, returns you to previ-
ous guide screen.
Info: Provides a program description.
A, B, C, D: Context-sensitive control
keys.
Keypad (0-9): Alphanumeric keys to
select content by channel number or
keywords.
Setup: Used for programming your
remote to control your TV, AVR, and
set-top box.
TV Input: Changes to the next available
input on your TV.
Note: Some features above require
programming your remote for control of
your TV.
FCC Compliance Statement
This equipment has been tested and found
to comply with the limits for a Class B dig-
ital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful in-
terference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not used in
Power: Enciende/apaga tu televisor.
accordance with the instructions, may cause
harmful interference to radio communications.
All Power: Un sólo botón para encender/
apagar tu televisor y tu caja decodifica-
There is no guarantee that interference will
dora.
not occur in a particular installation. If this
equipment does cause harmful interference
Vol +/–: Sube y baja el volumen de tu caja
to radio or television reception, the user is
decodificadora.
encouraged to try to correct the interference
by one or more of the following measuresA:
CH ^/∨: Selecciona el siguiente canal
hacia arriba o hacia abajo.
•
Reorient or relocate the receiving anten-
Mute: Enciende y apaga el sonido.
na.
•
Increase or decrease the separation be-
Replay:
tween the equipment and receiver.
•
Connect the equipment into an outlet on
Nota:
a circuit different from that which the re-
ceiver is connected.
•
Consult the dealer or an experienced re-
mote control/TV technician for help.
•
It is strongly recommended that the TV
be plugged into a separate wall outlet.
Video Controls: Controlan la visual-
The user is cautioned that changes and mod-
ización de On Demand o DVR, Play
ifications made to the equipment without the
(reproducir)/Pause (pausa), Fast-For-
approval of the manufacturer could void the
ward (avanzar rápidamente), y Rewind
user's authority to operate this equipment.
(retroceder rápidamente).
This device complies with part 15 of the FCC
Exit: Te saca de las pantallas de la guía y
rules. Operation is subject to the following
te regresa a ver la televisión.
two conditionsA: (1) This device may not cause
harmful interference, and (2) this device must
Search:
accept any interference received, including in-
terference that may cause undesired operation.
Rec: Graba el contenido que se está
viendo en ese momento.
"CAUTION" A: Exposure to Radio Frequen-
cy Radiation. Antenna shall be mounted in
Nota: Algunas funciones mencionadas
such a manner to minimize the potential for
anteriormente requieren de una caja
human contact during normal operation. The
decodificadora de DVR o acceso a la
antenna should not be contacted during op-
programación On Demand.
eration to avoid the possibility of exceed-
ing the FCC radio frequency exposure limit.
XFINITY/MenuA: Ingresa a los menús de
la guía en pantalla
Guide: Atajo a los listados de televisión.
OK: Selecciona el artículo resaltado
dentro de la guía.
Last: Te regresa al canal o a la pantalla de
la guía anterior.
Info: Proporciona la descripción de un
programa.
A, B, C, D: Teclas de control que fun-
cionan de acuerdo al contexto y que se
utilizan en configuraciones avanzadas.
Nota: Algunas de las funciones arriba
mencionadas requieren de una guía de
programación no disponible con todos los
aparatos.
Teclado numérico (0-9): Selecciona el
canal que deseas ver (ej., 0-9 ó 0-2-6).
Setup: Programa tu control remoto
para que funcione con tu televisor, caja
decodificadora o DTA.
TV Input:
Nota:
